Vertical Crankshaft Front Tine Tiller
10
5.8.
Remove the shim from tine shaft inspect for any
wear to the shaft or gears. See Figure 5.8.
5.9.
Pull Tine shaft through the gear.
See Figure 5.9.
NOTE:
Hi-Pro key between the tine shaft and
the bronze gear.
5.10. Lift the bronze gear out of the housing after the
tine shaft has been removed.
See Figure 5.10.
NOTE:
Gear tooth profile is concave to mate
with worm gear.
5.11. Inspect the bronze gear, bronze tine shaft bear-
ings, tine shaft, and housings for significant wear
or damage.
5.12. Remove and inspect worm input shaft for wear
or damage to bearings.
See Figure 5.12.
Figure 5.8
Shim
. 060
Figure 5.9
Hi-Pro
key
Figure 5.10
Figure 5.12
