OPERATING AND MAINTENANCE MANUAL
Chapter 11 - Risk analysis: residual risk
TAEevo Tech MINI 02÷10
33
The data in this manual are not binding and they can be modified by the manufacturer without notice.
Reproduction of this manual is strictly prohibited
EN
ENGLISH
21. Inadvertent start-up, overtravel/
unexpected excess speed (or any
other similar malfunction) caused
by: fault or malfunction of control
system with possibility of
disabling safety devices.
Electrical hazard during interventions
on machine with safety devices
inhibited.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; Chapter 5
“Installation“; 5.6 “Electrical
connections” and Chapter 9
“Operation and maintenance“
22. Inadvertent start-up, overtravel/
unexpected excess speed (or any
other similar malfunction) caused
by: fault or malfunction of control
system.
Electrical hazards associated with
environmental work conditions.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; Chapter 3
“Technical data“ and 5.6 “Electrical
connections”
23. Inadvertent start-up, overtravel/
unexpected excess speed (or any
other similar malfunction) caused
by: return of electric power supply
after failure.
Hazards associated with inadvertent
start-up of the machine when electric
power supply is restored.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; 5.6 “Electrical
connections” and Chapter 6 “Start up“
24. Inadvertent start-up, overtravel/
unexpected excess speed (or any
other similar malfunction) caused
by external factors on the electrical
equipment (EMC).
Electrical hazards associated with
electric stress on internal machine
components, short circuits and
overloads.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; 5.6 “Electrical
connections” and Chapter 9
“Operation and maintenance“
25. Hazards caused by assembly
errors.
Hazards associated with machine
instability caused by vibrations.
Hazards on contact with operating
fluids, risk of pollution due to
dispersion of fluids into the
environment.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; Chapter 5
“Installation“ and Chapter 6 “Start up“
26. Risk of falling or projection of
objects or fluids.
Contact of body parts with metallic
materials such as the fan blades or
moving parts of the compressor.
Disconnect the machine from the
electrical mains during interventions
on the hydraulic circuit.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; Chapter 5
“Installation“ and Chapter 9
“Operation and maintenance“
27. Loss of stability/upturning of
machine.
Crushing of body parts.
Strictly observe all manual
instructions.
Chapter 5 “Installation“ and
instructions on packaging.
28. Loss of stability/upturning of
machine due to installation on
unstable ground and/or vibrations
generated on connection pipelines.
Crushing of body parts due to
upturning of the machine, contact of
body parts with water due to failure of
connections to the hydraulic circuit
caused by excessive vibrations.
Strictly observe all manual
instructions.
Chapter 5 “Installation“ and Chapter 6
“Start up“
29. Hazards generated by absence of
and/or position of measures/
instruments influencing safety: all
guards.
Hazard of contact, due to sudden
ejections, with machine components
and processed or used materials.
Strictly observe all manual
instructions.
Chapter 2 “Safety“; Chapter 5
“Installation“; Chapter 6 “Start up“
and Chapter 9 “Operation and
maintenance“
30. Hazards generated by absence of
and/or position of measures/
instruments influencing safety:
graphic safety signs.
Hazard associated with the lack of or
inadequate graphic instruction and
warning symbols related to dangers
that could not be eliminated in design.
The operator must observe all graphic
safety signs on the machine and
replace when worn or illegible.
Strictly observe all manual
instructions.
Chapter 1 “General information“
Description of risk:
Effect:
User instructions:
Summary of Contents for TAEevo Tech MINI
Page 36: ......
