OPERATING AND MAINTENANCE MANUAL
Chapter 4 - Description
TAEevo Tech MINI 02÷10
16
The data in this manual are not binding and they can be modified by the manufacturer without notice.
Reproduction of this manual is strictly prohibited
ENGLISH
EN
4 . 2
O v e r a l l d i m e n s i o n s
See attached drawings.
4 . 3
M i n i m u m d i s t a n c e s f r o m w a l l s
See attached drawings.
4 . 4
W a t e r a n d r e f r i g e r a n t c i r c u i t s
See attached drawings.
4.4.1
Water circuit
The water flowing through the evaporator pipes cools and flows into the tank.
Then the water is sucked by a peripheric pump which sends it directly to the user.
A
by-pass pipe
is provided to guarantee a minimum water flow through the pump should a pipe at any point of the hydraulic
circuit be closed by mistake.
ATTENTION
The bypass is designed exclusively to protect the unit in the event of inappropriate closing of the shut-off valves.
The manufacturer advises strongly against operation of the by-pass for continuous cycles or lengthy periods of time.
A pressure gauge is connected to the pump output. It indicates the outlet water pressure of the plant.
4.4.2
Refrigerant circuit
The refrigerant is pumped by the refrigerant compressor to the condenser. The condenser is a heat exchanger and is cooled by
an air flow produced by a fan.
After the condenser, the refrigerant liquid passes through a drying filter and a laminating element.
The refrigerant then enters the evaporator’s circuit in which it flows in counter-current with respect to the water to be cooled.
When it exits the evaporator, the refrigerant is again sucked by the compressor and the cycle repeats itself.
The refrigerant circuit is also furnished with a high pressure switch (HP) of manual reset type (TAEevo Tech MINI 05-10).
4 . 5
E l e c t r i c a l c i r c u i t
See the enclosed electrical diagrams.
Summary of Contents for TAEevo Tech MINI
Page 36: ......
