MST Impact NS5001, User Manual

Page: 87 / 118

the Site Configuration editor. This template cannot be deleted, but new templates can be copied from it
and modified separately.
Note: Once a template is applied to an AP, any manual changes made to settings listed in the
template will be reverted automatically to the template default. Settings that are not defined by the
template can be changed freely.
New templates are created by copying an existing template (initially the only one to copy is
Site Defaults
).
A copied template will start with the same parameters as the original, but they are not linked, so further
changes to one will not affect the other. To create a new template, select another template from the list
and click the
Copy button. To delete a template, click the Remove button.
AP Config Template Details
This section contains the details for each template:
• System ID is an automatically assigned identifier used by the ICA.
• Name - A name or description for the template.
•
Edit Parameters
- Individual parameters can be selected and modified, or ignored, for each template
by clicking this link to open the
Parameters
dialogue box (See
Edit Parameters
section below).
Editing Parameters
In the Parameters dialog box, search for the desired parameter by typing all or part of any of the displayed
column values:
• Managed: To manage a parameter, tick the checkbox in this column.
Fixed
entries cannot be disabled
or changed, while
required
entries can be edited but not disabled. Unmarked entries can be disabled
by unticking the checkbox.
• Parameter Name: For more information on parameters that affect a specific AP model on the network,
see the TFTP Parameters section of the user manual for that model.
NS50 User Guide 87 Revision C
Centralised Configuration Management