MST Impact NS5001, User Manual

Page: 64 / 118

Note: Before starting this procedure, note the following
• The device's MAC address (visible in STATUS > DEVICE INFO )
• Settings on the device that differ from the Site Defaults
Centralised configuration checklist
• Confirm all required template settings in the Configuration > AP Config Templates editor.
• In Devices > Access Points , select the device, tick the Manage Configuration checkbox and select
the correct template.
• If required, click
Edit Overridden Parameters
and edit any required parameters for the specific
device.
• Save the new settings.
• Wait for the device's Managed status to change from
PENDING
to
CURRENT
.
Note: As a template can be applied to multiple devices, it is fixed to DHCP for networking to avoid
address conflicts. If static IP addresses are required, these must be set in the individual devices'
overridden parameters.
It is recommended that a client device (PC or laptop) has a wired connection to the network device to
upgrade the firmware. Please contact your MST System Engineer for firmware files.
To upgrade the firmware:
1. Click Choose File . A dialog box will open.
Revision C 64 NS50 User Guide
Configuration Using the Web Interface