The Switch ports have the following configuration options:
Recommended Settings
Description
Field
Naming is specific to each device.
Used to provide a convenient name for the port.
It is often used to name the device connected to
it. For example, "Level 68 camera".
Name
On or Off.
Enables or disables the port.
Enabled
Auto
is usually the best setting.
However some devices require
Ports 5 thru 8 allow the speed and duplex to be
controlled.
Speed & Duplex
Speed & Duplex to be hard coded
due to poor Auto-negotiation
implementations.
Enabling 48v Power Over Ethernet
48VDC PoE supply for ports 5-8 can be enabled by selecting the
PoE Power Rail Enable
check box. If
this setting has been changed but not saved, the
Reset PoE
button will change it back to its saved setting.
If the voltage to the NS50 is too low to enable PoE on startup, the following message will be displayed:
NS50 User Guide
79
Revision C
Configuration Using the Web Interface
Summary of Contents for Impact NS5001
