MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach, Switzerland
Phone +41 52 316 25 55 • [email protected]
• www.msr.ch
• www.datalogger.shop
© MSR Electronics GmbH, 2020-03-12. All rights reserved.
3
1.1. Sending data through an existing WiFi network to the MSR SmartCloud
For this option you do not require any additional hardware, as it uses the existing network
infrastructure.
In order to be able to send the current measurement values and/or recorded data to the MSR
SmartCloud via an existing network, the logger must be connected to this wireless local area
network (WiFi). The network
must
have Internet access. If this is not possible, we recommend
variant 1.2.
Enter the configuration data required by the data logger in the setup program of the MSR PC
software under "WiFi":
Connect the MSR145W2D to the PC using a USB cable (see also the
MSR145W2D Quick Reference Guide
www.msr.ch/en/msr145w2d
Start the MSR PC program (For download and installation: please refer to
www.msr.ch/en/support/pcsoftware
).
Run setup.
"WLAN/WiFi” tab
Please enter settings (see
also Appendix A2
):
Network (SSID): Name of the WiFi network in which the logger should be
integrated.
Network Key (WPA 2): Enter the corresponding WiFi password for WPA 2.
Destination:
URL
->
MSR Smartcloud
as target to choose.
