MSR MSR145W2D, User Manual

Page: 15 / 27

MSR Electronics GmbH • Mettlenstrasse 6 • CH-8472 Seuzach, Switzerland
Phone +41 52 316 25 55 • info@msr.ch • www.msr.ch • www.datalogger.shop
© MSR Electronics GmbH, 2020-03-12. All rights reserved. 15
Appendix A1: Connect PC to the WiFi network

Connect the PC to the WLAN/WiFi in which the MSR145W2D ("Logger") should be
integrated. To do this select the relevant network (SSID) under "Network" in
Windows® and enter the password. Remember both and have them at hand.

As an alternative the PC can also be connected to the relevant router using a network
cable.

If a network connection has been established, please determine the network address
(IP address) assigned to the PC:

For example: In Windows® open the command prompt / right click on the Windows
symbol -> select Windows Powershell -> enter "ipconfig" and press "Enter". The IPv4
address of the PC and the standard gateway (the address of the network/WiFi router
in which the PC is located and in which the logger should be integrated.

Please remember the IPv4 address of the PC.
Notice: It is recommended to make the IPv4 address of the PC in the router static or
to assign a name to the PC in the network. For a setup example, please refer to
"Example” below: Local area network with the Fritz!Box 6820 LTE" - please refer to
Appendix A4 .