MSI NX6200-TD128, User Manual

Page: 135 / 142

MS I Li ve U pd at e 3
5-23
4. With the BIOS II, you would be able to start the system normally.
After entering the operating system (OS), set up the jumper to
enter the BIOS I mode (work mode). Now you can restore the
original BIOS or you can try to update the BIOS using the flash
5. If the updating procedure still failed**, you may try again by re-
peating Step 1 to 4. If the updating procedure is successful, that
means the BIOS data is written onto the chip successfully.
6. Replace the case and restart the computer.
MSI reminds you...
Warning: It is very dangerous to perform the proce-
dure under such condition. To ensure your safety
and prevent electric shocks and damages, please
Do NOT touch any component in the computer.
MSI reminds you...
* To update the BIOS, you must use the special flash
utility ( MSI Live Update Series ) provided by MSI only,
which can fully support the Twin-BIOS
TM
technology.
If the third party
’
s utility is used in the updating
procedure, it will erase the data in BIOS II.
** If you always encounter problems while updating
the BIOS and driver, check if the mainboard
’
s chipset
driver was properly installed. Please install the
chipset driver from your mainboard vendor first and
try again.
PDF created with pdfFactory Pro trial version www.pdffactory.com