5-2
5.2 Display Problem
Q:
My monitor displays nothing after the system boots up.
Your VGA card may not be installed correctly. Please check the
installation procedure as described in
Chapter 2 Hardware
Installation
.
Make sure that your monitor are connected to the VGA card properly,
and the power is turned on.
Q:
The image is poor quality; the screen image is off-center; or the
image’s shape become deformed.
Your VGA card’s driver may not be installed correctly. Please re-
install the driver and restart the computer (
see instructions in Chap-
ter 3 Software Installation
).
The
Display Properties
in your system may not be set roperly. Click
, choose
Settings
-->
Control Panel
-->
Display
to set the
optimized values.
Try to adjust your monitor’s control settings (e.g. brightness,contrast,
and so on). Please refer to your monitor manual for more information.
Q:
How do I change the resolution settings on my computer?
Click
, choose
Settings
-->
Control Panel
-->
Display
to
open the
Display Properties
window. Under “Settings” tab, move
the slider bar to the right or left to set the proper resolution setting,
and click on the drop-down menu to select different color setting
(16-bit high color is recommended for most applications). When
these changes are done, click “OK” to apply the new settings. The
screen will go black for awhile and then come back with the new
size. You will be asked to confirm the changes, click “Yes” in the
new Display Properties dialogue box .
Summary of Contents for MX400 Pro-TC64S
Page 1: ...I MX400 Series Graphics Accelerator U SERS G UIDE USERS GUIDE Version 1 0 Oct 2001 G52 MA00455...
Page 40: ...3 18...
Page 45: ...4 5 Select a folder to save the driver file Downloading Driver updating...
Page 50: ...4 10 Downloading Asking to continue Restart the computer after the BIOS updated...
