2-2
Installation on system with existing VGA card
To replace the existing VGA card to your computer, please follow the
steps below:
1.
If your operating environment is Windows
®
NT system, switch your
display driver to standard VGA first (refer to Windows
®
NT docu-
mentation for more information). If you are using Windows
®
98/
ME/2000, skip this step.
2.
Turn off the computer and unplug all the cables and power cords.
3.
Remove the computer case.
4.
Remove the existing VGA card. Locate the AGP slot on your
mainboard.
Warning:
Inserting the VGA card into a wrong type of slot (e.g.
PCI slot) will damage your card (refer to your mainboard manual
for more information).
5.
Put the card directly over the AGP slot and press one end of the
card into the slot first. Slightly but firmly press the other end until
it is fully seated in the slot.
6.
Secure the card with a bracket screw.
7.
Replace the case.
8.
Connect the monitor (see previous section).
9.
Restart the computer. Now, you are ready to install the driver for
the VGA card.
Summary of Contents for MX400 Pro-TC64S
Page 1: ...I MX400 Series Graphics Accelerator U SERS G UIDE USERS GUIDE Version 1 0 Oct 2001 G52 MA00455...
Page 40: ...3 18...
Page 45: ...4 5 Select a folder to save the driver file Downloading Driver updating...
Page 50: ...4 10 Downloading Asking to continue Restart the computer after the BIOS updated...
