4-14
4.
With the BIOS II, you should be able to boot up the system normally.
After entering the OS, set the jumper back to enter the BIOS I mode
(work mode); now you can restore the original BIOS or you can try
to update the BIOS using the flash utility* again.
5.
If the updating is still failed**, repeat the steps 3 to 4; if the updating
is successfully, the BIOS data is written to the chip successfully.
6.
Replace the case and restart the computer.
Warning:
It is very dangerous doing this procedure under such
status, please do not touch any other components in the
computer. Otherwise, both the components and the user may
be in danger of electrical shock or damage.
* NOTE:
To update the BIOS, you must only use the special flash
utility (
MSI Live Update Series
) provided from MSI, which can fully
support the SafeBIOS
TM
technology. If the third party’s utility is used
during the updating, it will erase the data in BIOS II.
** If you always encounter problems during updating the BIOS and
driver, it may be that the mainboard’s chipset driver not installed.
Please install the chipset driver from your mainboard vendor first and
try again.
Summary of Contents for MX400 Pro-TC64S
Page 1: ...I MX400 Series Graphics Accelerator U SERS G UIDE USERS GUIDE Version 1 0 Oct 2001 G52 MA00455...
Page 40: ...3 18...
Page 45: ...4 5 Select a folder to save the driver file Downloading Driver updating...
Page 50: ...4 10 Downloading Asking to continue Restart the computer after the BIOS updated...
