IV
Important Safety Precautions
Always read and follow these basic safety precautions carefully when
handling any piece of electronic component.
1. Keep this User’s Manual for future reference.
2. Keep this equipment away from humidity.
3. Lay this equipment on a reliable flat surface before setting it up.
4. The openings on the enclosure are for air convection hence protects
the equipment from overheating.
5. Make sure the voltage of the power source and adjust properly
110/220V before connecting the equipment to the power inlet.
6. Place the power cord such a way that people can not step on it.
Do not place anything over the power cord.
7. Always Unplug the Power Cord before inserting any add-on card
or module.
8. All cautions and warnings on the equipment should be noted.
9. Never pour any liquid into the opening that could damage or
cause electrical shock.
10. If any of the following situations arises, get the equipment checked
by a service personnel:
The power cord or plug is damaged
Liquid has penetrated into the equipment
The equipment has been exposed to moisture
The equipment has not work well or you can not get it work
according to User’s Manual
The equipment has dropped and damaged
If the equipment has obvious sign of breakage
11. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60
0
C
(140
0
F), IT MAY DAMAGE THE EQUIPMENT.
Summary of Contents for MX400 Pro-TC64S
Page 1: ...I MX400 Series Graphics Accelerator U SERS G UIDE USERS GUIDE Version 1 0 Oct 2001 G52 MA00455...
Page 40: ...3 18...
Page 45: ...4 5 Select a folder to save the driver file Downloading Driver updating...
Page 50: ...4 10 Downloading Asking to continue Restart the computer after the BIOS updated...
