2-1
To install the VGA card to your computer, please follow the steps
below:
Installation on new system
1.
Remove the computer case.
2.
Locate the AGP slot on your mainboard.
Warning:
Inserting your VGA card into a wrong type of slot
(e.g. PCI slot) will damage your card (refer to your mainboard
manual for more information).
3.
Put the card directly over the AGP slot and press one end
of the card into the slot first. Slightly but firmly press the
other end until it is fully seated in the slot.
4.
Secure the card with a bracket screw.
5.
Install all other cards and devices and connect all the
cables, and then replace the case.
6.
Connect the monitor. Now, you are ready to install the
software on your computer.
2. Hardware Installation
2.1 Card Installation
VGA card
*The appearance may
be different by different
models
Mainboard
Bracket screw
AGP slot
HARDW
ARE INST
ALLA
TION
22222
Summary of Contents for MX400 Pro-TC64S
Page 1: ...I MX400 Series Graphics Accelerator U SERS G UIDE USERS GUIDE Version 1 0 Oct 2001 G52 MA00455...
Page 40: ...3 18...
Page 45: ...4 5 Select a folder to save the driver file Downloading Driver updating...
Page 50: ...4 10 Downloading Asking to continue Restart the computer after the BIOS updated...