MSI MSI-8000 Operator'S Manual Download

Page: 5 / 44

Introduction

1.0

Introduction

The

MSI-8000

RF Remote Display

is a wireless remote display for viewing weight from

several compatible MSI Crane Scales and Dyna-Links. It is fully sealed for outdoor use in

most ambient conditions. Using a Remote Display enhances the safety and usability of the

MSI’s Dyna-Link and Crane Scale systems. The RF Remote Indicator allows tension

monitoring from a distance and adds the ability to print and store data. The

MSI-8000

uses

a rechargeable Lithium Polymer battery providing up to 36 hours (typical) of continuous

use between charges.
If you have any questions or comments please contact

Measurement Systems International:

Phone (toll free): 1-800-874-4320

Authorized distributors and their employees can view or download this manual

from the Measurement Systems International distributor site at:



www.msiscales.com.

Summary of Contents for MSI-8000













































Search results

Summary of Contents for MSI-8000

Reviews:

Related manuals for MSI-8000

Brands by name

Popular brands

MSI MSI-8000, Operator'S Manual

Search results

Summary of Contents for MSI-8000

Reviews:

Related manuals for MSI-8000

Brands by name

Popular brands