MSI MSI-8000, Operator'S Manual

Page: 9 / 44

Introduction 5
1.2.1 MSI-8000 Annunciators
The
MSI-8000
uses LCD annunciators to indicate tension mode and other information.
Table 1-1. MSI-8000 Annunciators
The stable annunciator indicates that the tension force has settled within the
motion window (usually ±1d).
When this symbol is off, the Scale / Dyna-Link will not zero, tare, or totalize.
Center-of-Zero- Indicates the tension is within 1/4d of zero.
BT
LOW BATTERY- Appears when approximately 10% of battery life remains.
The BT symbol blinks when automatic shutdown is eminent.
Pk
PEAK- Indicates the RF Linked Device is in the Peak Hold mode.
Ttl
TOTAL – Indicates the RF Linked Device is displaying the Total accumulated
weight. This is a temporary display lasting less than 5 seconds.
Net
NET – Indicates the RF Linked Device is in the Net tension mode. A Tare weight
is subtracted from the gross tension.
M
M – In conjunction with the Ton annunciator, indicates the RF Linked Device is
displaying Metric Tons.
kg
kg – Indicates tension display is in kilograms.
kN
kN – Indicates tension display is in kiloNewtons.
lb
lb – Indicates tension display is in pounds.
Ton
Ton – Illuminated alone, indicates the RF Linked Device is displaying in US Short
Tons (1 ton = 2000 lb.). When illuminated along with the ‘M’ the RF Linked
Device is displaying in Metric Tons (1 metric ton = 1000 kg)
SET POINTS – User programmable set points for overload warnings. Set Points
1 and 2 are high brightness Red LEDs
F1 F2 – These Blue LEDs are used to indicate various operational features of
functions programmed into the F1 and F2 keys.
Example:
In Peak Hold mode the associated LED will blink whenever a new peak reading
is captured.
0