A-23
nVIDIA SATA RAID
4
.
Click
Next.
The Disk Selection page appears.
5. Select the drive that you want to rebuild by clicking it from the list, then click
Next
.
The Completing the NVIDIA Rebuild Array page appears.
6.
Click
Finish
. The array rebuilding starts after a few seconds, and a small pop-up
message appears towards the bottom right corner of the screen as shown in the
figure below.
W hen the rebuilding process is finished you will see the pop up box shown in Figure
below.
9184v1.0-Appendix A(nVIDIA SATA RAID).p65
2007/4/19,
下午
04:57
23