A-14
MS-9184 Server Board
Assigning a Dedicated Disk
To mark a disk as dedicated, or reserve it for use by a specific array,
Step 1: Mark the Disk as a Free Disk
1.
Enter the system BIOS setup and make sure that the drive that you want to mark as
free is RAID enabled.
2.
Boot into W indows and run the NVRAIDMAN program.
If the disk is not part of any RAID array, then it will appear under the Free Disk
section of the RAID GUI.
Step 2: Dedicate the Free Disk to an Array
W hile running NVRAIDMAN, dedicate the free disk to an array by doing the following:
1. Right click one of the two Mirrored arrays as shown below.
2. Select
Designate Spare
from the menu to launch the Spare Disk Allocation Wizard.
9184v1.0-Appendix A(nVIDIA SATA RAID).p65
2007/4/19,
下午
04:57
14