A-22
MS-9184 Server Board
Rebuilding a RAID Array
Rebuilding is the process of restoring data to a hard drive from other drives in the
array. This applies only to fault tolerant arrays such as RAID 1. For example, assum-
ing you have a two disk RAID 1 array, and one of the drives fail, then you need the
lost data on the newly added drive.
Rebuilding Instructions
After creating a mirrored array, you can rebuild the array using the following steps:
1 Go to Windows and run the NVIDIA RAID Management utility.
The picture below shows an example of a system with one mirrored array and two
free disks.
2
.
Right-click on Mirroring. The popup menu appears.
3.
From the popup menu, click
Rebuild Array
. The NVIDIA Rebuild Array W izard
appears.
9184v1.0-Appendix A(nVIDIA SATA RAID).p65
2007/4/19,
下午
04:57
22
