manualshive.com logo in svg

MSI Baby AT SI19, Owner'S Manual, Page: 86 / 104

Share
Download
MSI Baby AT SI19 Owner'S Manual Download Page 86

CHAPTER 4

CHAPTER 4

CHAPTER 4

CHAPTER 4

CHAPTER 4

AMI

AMI

AMI

AMI

AMI

®

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

 BIOS USER’S GUIDE

4-6

Description of the item on screen follows:

1st Boot Device/2nd Boot Device/3rd Boot Device/4th Boot
Device

This option sets the sequence of boot drives.
The settings are:
IDE0

The system will boot from the first HDD.

IDE1

The system will boot from the Second HDD.

IDE2

The system will boot from the Third HDD.

IDE3

The system will boot from the Fourth HDD.

F(optical)

The system will boot from LS-120(120M Floppy).

SCSI

The system will boot from the SCSI.

Network

The system will boot from the Network drive.

CD-ROM

The system will boot from the CD-ROM.

Disable

Disable this sequence.

Boot From Card BIOS

This option support boot ROM under DOS mode.

Try other Boot Devices

This option sets the device boot, if all the Four Boot Devices failed.

Quick Boot

Set this option to Enabled to permit AMI

®

 BIOS to boot within 5

seconds.  This option replaces the old ABOVE 1 MB Memory Test option.
The Optimal default setting is Enabled.  The Fail-Safe default setting is
Disabled.

Boot up Num Lock

When this option is set to Off, AMI® BIOS turns off the Num Lock

key when the system is powered on.  The end user can then use the arrow
keys on both the numeric keypad and the keyboard.  The settings are On or
Off.  The optimal default and Fail-Safe default settings are On.

Summary of Contents for Baby AT SI19









































































































Reviews:

No comments