manualshive.com logo in svg

MSI Baby AT SI19, Owner'S Manual, Page: 63 / 104

Share
Download
MSI Baby AT SI19 Owner'S Manual Download Page 63

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

AWARD

AWARD

AWARD

AWARD

AWARD

®

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

3-18

System BIOS Cacheable

Choose Enabled or Disabled.  Enabling this will cause the system

BIOS to be shadowed in both the DRAM and the Cache memory, otherwise,
it’s only shadowed in the DRAM.

Video BIOS Cacheable

Same as system BIOS cacheable.

Memory Hole at 15M-16M

You can reserve this area of system memory for ISA adapter ROM.

When this area is reserved, it can be cached.  The user information of
peripherals that need to use this area of system memory usually discusses
their memory requirements.

CPU Warning Temperature

During Enabled, whenever the processor temperature reach a

Critical level, this will show warning.

Shutdown Temperature

This support the ACPI specification.  During Enabled, whenever

the system temperature reach a critical level,  the system will automatically
shutdown.

Current CPU Temp/Current System Temp/Current CPU Fan/
Current System Fan/Vcore/Vio/+5v/+12v

These items will show the current system temp, CPU/system Fan

rotation & sytem voltage, if the System Hardware Monitor is present.

Enabled

Memory hole supported.

Disabled

Memory hole not supported.

Summary of Contents for Baby AT SI19









































































































Reviews:

No comments