manualshive.com logo in svg

MSI Baby AT SI19, Owner'S Manual, Page: 73 / 104

Share
Download
MSI Baby AT SI19 Owner'S Manual Download Page 73

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

AWARD

AWARD

AWARD

AWARD

AWARD

®

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

3-28

DMA 0/1/3/5/6/7 assigned to

When resources are controlled manually, assign each system DMA

channel as one of the following types, depending on the type of device
using the interrupt:

Legacy ISA Devices compliant with the original PC AT bus

specification, requiring a specific interrupt (such as IRQ4 for serial port 1).
PCI/ISA PnP Devices compliant with the Plug and Play standard, whether
designed for PCI or ISA bus architecture.  The settings are Legacy ISA or
PCI/ISA PnP.

PCI IRQ Activated by

This sets the method by which the PCI bus recognizes that an IRQ

service is being requested by a device.  Under all circumstances, you should
retain the default configuration unless advised otherwise by your system’s
manufacturer.  The settings are Level or Edge.

PCI IDE 2nd Channel

The IDE standard supports two channels (interfaces) with two

devices on each channel.  Enable the second channel if your system has two
PCI IDE connectors in use, either on the system board or on expansion
boards.  Disable the second channel if a second IDE connector is not
present or not in use.  The settings are Enabled or Disabled.

PCI IDE IRQ Map to

This allows you to configure your system to the type of IDE disk

controller in use.  By default, Setup assumes that your controller is an ISA
(Industry Standard Architecture) device rather than a PCI controller.  The
more apparent difference is the type of slot being used.

If you have equipped your system with a PCI controller, changing

this allows you to specify which slot has the controller and which PCI
interrupt (A, B, C, or D) is associated with the connected hard drives.

Remember that this settings refers to the hard disk drive itself,

rather than individual partitions.  Since each IDE controller supports two
separate hard drives, you can select the INT# for each.

Selecting “PCI Auto” allows the system to automatically determine

how your IDE disk system is configured.

Summary of Contents for Baby AT SI19









































































































Reviews:

No comments