manualshive.com logo in svg

MSI Baby AT SI19, Owner'S Manual, Page: 67 / 104

Share
Download
MSI Baby AT SI19 Owner'S Manual Download Page 67

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

CHAPTER 3

AWARD

AWARD

AWARD

AWARD

AWARD

®

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

 BIOS SETUP

3-22

Stdby Speed (div by)

Sets the CPU’s speed during Doze mode.  The speed is reduced to a

fraction of the CPU’s normal speed.  The divisors range from 1 to 8.  The
settings are from 1 to 8.

MODEM Use IRQ

This determines the IRQ in which the MODEM can use.  The

settings are 3, 4, 5, 7, 9, 10, 11, or NA.

(Ctrl-Alt-Backspace)

During Power off, whenever the Ctrl-Alt-Back Space key  is press

simultaneously, this will turned off the system.  During Suspend,  whenever
the Ctrl-Alt-Back Space key is press simultaneously, to suspend the system.
During Disabled, this key will not function.

Soft-Off by PWR-BTTN

The settings are Delay 4 sec or Instant-off.  During Delay 4 sec, if

you push the switch one time the system goes into suspend mode and if
you push it more than 4 second, the system shuts down.   During Instant-
off, the system will shut down once you push the switch.

Ring Power Up

During Disabled, the system will ignore any incoming call from the

modem.  During Enabled, the system will boot up if there’s an incoming call
from the modem.

Note: If you have change the setting, you must let the system boot up until

it goes to the operating system, before this function will work.

LAN Power Up

To use this function, you need a LAN add-on card which support

power on functions.  It should also support the wake-up on LAN
jumper(JWOL).

Summary of Contents for Baby AT SI19









































































































Reviews:

No comments