MSI AXIS 945GM - Axis - 945GM User Manual Download Page 3

Page: 3 / 82

iii

Trademark

All trademarks are the properties of their respective owners.

Intel

and Pentium

are registered trademarks of Intel Corporation.

PS/2 and OS

/2 are registered trademarks of International Business Machines

Corporation.

W indows

95/98/2000/NT/XP are registered trademarks of Microsoft Corporation.

Netware

is a registered trademark of Novell, Inc.

Award

is a registered trademark of Phoenix Technologies Ltd.

AMI

is a registered trademark of American Megatrends Inc.

U.S. Patent Numbers

4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.

This product incorporates copyright protection technology that is protected by U.S.

patents and other intellectual property rights. Use of this copyright protection technol-

ogy must be authorized by Macrovision, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering

or disassembly is prohibited.

Revision History

Revision

Revision History

Date

v1.0

First release

July 2006

Copyright Notice

T he material in this document is the intellec tual property of

M ICR O-STAR

INTERNATIONAL

. W e take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Summary of Contents for AXIS 945GM - Axis - 945GM



















































































Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands

MSI AXIS 945GM - Axis - 945GM, User Manual

Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands