MSI AXIS 945GM - Axis - 945GM User Manual Download Page 45

Page: 45 / 82

M S-6417 Barebone

3-12

Integrated Peripherals

On-Chip Serial ATA

This setting is used to specify the SATA controller. The settings are:

[Disabled]

Disable the SATA controller.

[Auto]

PATA and SATA will be arranged by BIOS,
and you will be able to see the IDE Device
status listed in

Standard COMS Features

[Legacy Mode]

PATA and SATA will be combined. Max. of 2
IDE drives in each channel are available.

[Native Mode]

PATA and SATA will both be enabled. Max. of
6 IDE drives are supported.

SATA PORT Speed Settings

This setting controls the speed of the SATA port.

OnChip IDE Device

Press <Enter> and the following sub-menu appears:

Summary of Contents for AXIS 945GM - Axis - 945GM



















































































Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands

MSI AXIS 945GM - Axis - 945GM, User Manual

Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands