MSI AXIS 945GM - Axis - 945GM User Manual Download Page 46

Page: 46 / 82

3-13

BIOS Setup

Onboard Device

Press <Enter> and the following sub-menu appears:

USB Controller

This setting is used to enable/disable the onboard USB controller.

USB 2.0 Controller

This setting is used to enable/disable the onboard USB 2.0 controller.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.

AC97 Audio

[Auto] allows the mainboard to detect whether an audio device is
used. If an audio device is detected, the onboard AC97 (Audio Codec

’

97)

controller will be enabled; if not, it is disabled. Disable the controller if
you want to use other controller cards to connect an audio device.

Onboard LAN Device 1/2

This setting controls the onboard LAN 1/2 device.

Onboard Lan 1/2 Boot ROM

These items enable or disable the initialization of the onboard LAN Boot
ROMs during bootup. Selecting [Disabled] will speed up the boot
proc ess.

Summary of Contents for AXIS 945GM - Axis - 945GM



















































































Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands

MSI AXIS 945GM - Axis - 945GM, User Manual

Search results

Summary of Contents for AXIS 945GM - Axis - 945GM

Reviews:

Related manuals for AXIS 945GM - Axis - 945GM

Brands by name

Popular brands