MSI 945-E - Hetis - 0 MB RAM User Manual Download Page 34

Page: 34 / 93

M S-6439 Barebone

3-2

Round-headed screw

: This type of screw is used to attach

the HDD and Card Reader to the tray.

Overview

The built-in mainboard is designed for Hetis 900 Series Barebone only. Except the

mainboard, the built-in components of the barebone include power supply. In this

chapter we will show you how to install CPU, CPU Cooler, Memory Modules, Card

Reader, Hard Disk Drive (HDD) and Optical Disk Drive (ODD).

Installation Tools

C ross type s crew driv er

, can be used to do most of the

installation. Choose one with a magnetic head would be better.

Pliers

, can be used as an auxiliary tool to connect some con-

nectors or cables.

Forceps

, can be used to pick up tiny screws or set up the

jumpers.

Rubber gloves

, can prevent yourself from being incised and

suffering the static charge.

Installation Screws

Two types of screws are used in assembling the barebone: Round-headed screw
and thumb screw.

Summary of Contents for 945-E - Hetis - 0 MB RAM






























































































Search results

Summary of Contents for 945-E - Hetis - 0 MB RAM

Reviews:

Related manuals for 945-E - Hetis - 0 MB RAM

Brands by name

Popular brands

MSI 945-E - Hetis - 0 MB RAM, User Manual

Search results

Summary of Contents for 945-E - Hetis - 0 MB RAM

Reviews:

Related manuals for 945-E - Hetis - 0 MB RAM

Brands by name

Popular brands