2-11
Hardware Setup
Front Panel Connector: JFP1
This connector is for electrical connection to the front panel switches and LEDs. The
JFP1 is compliant with Intel
®
Front Panel I/O Connectivity Design Guide.
JFP1
HDD
LED
Reset
Switch
Power
LED
Power
Switch
+
+
+
-
-
-
10 9
2 1
PIN
1
2
3
4
5
6
7
8
9
SIGNAL
HD_LED_P
FP PWR/SLP
HD_LED_N
FP PWR/SLP
RST_SW_N
PWR_SW_P
RST_SW_P
PWR_SW_N
RSVD_DNU
DESCRIPTION
Hard disk LED pull-up
MSG LED pull-up
Hard disk active LED
MSG LED pull-up
Reset Switch low reference pull-down to GND
Power Switch high reference pull-up
Reset Switch high reference pull-up
Power Switch low reference pull-down to GND
Reserved. Do not use.
Pin Definition
CD-In Connector: JCD1
This connector is provided for external audio input.
JCD1
R
GND
L
SPDIF-Out Connector: J1
(For HDMI Graphics Card Audio Line Use Only)
This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission to the HDMI graphics card.
J1
SPDF0
GND
Summary of Contents for 945-E - Hetis - 0 MB RAM
Page 1: ...Hetis 900 Series MS 6439 V1 X Barebone G52 64391X1 ...
Page 6: ...vi WEEE Statement ...
Page 7: ...vii ...
Page 8: ...viii ...
