MSI 945-E - Hetis - 0 MB RAM User Manual Download Page 82

Page: 82 / 93

M S-6439 Barebone

A-10

3. Playback control

M u te

You may choose to mute single or multiple volume controls or to completely mute

sound output.

Tool

- Show the following volume controls

This is to let you freely decide which volume control items to be displayed.

- Advanced controls

- Enable playback multi-streaming

W ith this function, you will be able to have an audio chat with your friends via

headphone (stream 1 from front panel) while still have music (stream 2 from back

panel) in play. At any given period, you can have maximum 2 streams operating

simultaneously.

Playback device

This function is to let you freely decide which ports
to output the sound. And this is essential when multi-
streaming playback enabled.

- Realtek HD Audio Rear Output

- Realtek HD Audio Front Output

Tool

Mute

Summary of Contents for 945-E - Hetis - 0 MB RAM






























































































Search results

Summary of Contents for 945-E - Hetis - 0 MB RAM

Reviews:

Related manuals for 945-E - Hetis - 0 MB RAM

Brands by name

Popular brands

MSI 945-E - Hetis - 0 MB RAM, User Manual

Search results

Summary of Contents for 945-E - Hetis - 0 MB RAM

Reviews:

Related manuals for 945-E - Hetis - 0 MB RAM

Brands by name

Popular brands