2
INSTALLATION INSTRUCTIONS
M S D
•
W W W . M S D P E R F O R M A N C E . C O M
• ( 9 1 5 ) 8 5 5 - 7 1 2 3 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
LOOSE WIRES
BLACK/GRAY
Pin-A/B Ground. Connect to a ground source, such as the engine or battery negative.
PINK
Pin-C
On/Off wire. Connect to a switched 12 volt source.
YELLOW
Tach Signal. Provides a 12 volt square wave signal.
CRANKSHAFT SENSOR, 3-PIN
ORANGE/YELLOW
Pin-A
Crank Sensor Signal
BROWN
Pin-B
Sensor Ground
ORANGE
Pin-C
5 Volt Supply
CAMSHAFT SENSOR, 3-PIN
BROWN/WHITE
Pin-C
Cam Sensor Signal
BROWN
Pin-B
Sensor Ground
ORANGE
Pin-A
5 Volt Supply
MAP CONNECTOR, 3-PIN (OPTIONAL)
BROWN
Pin-A
Sensor Ground
LT. GREEN
Pin-B
MAP Sensor Signal
ORANGE
Pin-C
5 Volt Supply
COIL CONNECTOR, CYLINDERS 2, 4, 6, 8
BLACK
Pin-A Ground
RED/GREEN
Pin-B Coil-2
BROWN/GREEN Pin-C Coil-4
BROWN
Pin-E
Sensor Ground
WHITE/BLUE
Pin-F Coil-6
VIOLET/BLUE
Pin-G Coil-8
PINK
Pin-H
12 Volt Supply
Note: Pin-D is not used.
COIL CONNECTOR, CYLINDERS 1, 3, 5, 7
BLACK
Pin-A Ground
RED
Pin-B Coil-7
GREEN
Pin-C Coil-5
BROWN
Pin-E
Sensor Ground
LT. BLUE
Pin-F Coil-3
VIOLET
Pin-G Coil-1
PINK
Pin-H
12 Volt Supply
Note: Pin-D is not used.
