CAUTION
!
WA R N I N G
!
NOTE
SAFETY PRECAUTIONS
Before operating, maintaining or servicing any Carlisle Fluid
Technology MS Powder electrostatic coating system, read
and understand all of the technical and safety literature for
your MS Powder products. This manual contains information
that is important for you to know and understand. This
information relates to
USER SAFETY
and
PREVENTING
EQUIPMENT PROBLEMS
. To help you recognize this
information, we use the following symbols. Please pay
particular attention to these sections.
A WARNING! states information to alert you to
a situation that might cause serious injury if
instructions are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure
in progress.
While this manual lists standard specifications and service
procedures, some minor deviations may be found between
this literature and your equipment. Differences in local codes
and plant requirements, material delivery requirements,
etc., make such variations inevitable. Compare this manual
with your system installation drawings and appropriate MS
Powder equipment manuals to reconcile such differences.
Careful study and continued use of this manual will provide a
better understanding of the equipment and process, resulting
in more efficient operation, longer trouble-free service and
faster, easier troubleshooting. If you do not have the manuals
and safety literature for your MS Powder system, contact
your local MS Powder representative or MS Powder.
WA R N I N G
!
WA R N I N G
!
The user
MUST
read and be familiar with
the Safety Section in this manual and the safety
literature therein identified.
This equipment is intended to be used by
trained personnel
ONLY
.
This manual
MUST
be read and thoroughly
understood by
ALL
personnel who operate, clean
or maintain this equipment! Special care should be
taken to ensure that the
WARNINGS
and safety
requirements for operating and servicing the
equipment are followed. The user should be aware
of and adhere to
ALL
local building and fire codes
and ordinances as well as
NFPA-33 AND EN 50177
SAFETY STANDARDS, LATEST EDITION
, or
applicable country safety standards, prior to installing,
operating, and/or servicing this equipment.
The hazards shown on the following pages may
occur during the normal use of this equipment.
SAFETY
Repairs may only be performed by authorized personel.
PA-18-02-R0 (08/2018)
5 / 52
www.carlisleft.com
SAFETY
EN
