MRMC MRMC-1464-01, Quick Start Manual

Page: 38 / 52

Robotic Pod Quick Start Guide
34
4. Click SAVE TO ROBOT to save these settings for the Pod in MHC
client.
5. Choose Settings > Robot and select the Tools tab. Click the Reset
Robot button. The Pod might take up to 60 seconds to appear
connected in MHC.
6. Log out and log in as a user. Once the Pod is successfully connected
to an FTP server, a
solid (stable) network icon would appear below
Note
If your FTP server is in the same network as the Pod and the MHC
PC, then IP address of the FTP server should be in the same network
range. If the FTP server is outside the network of the Pod and MHC
PC, contact your Network Administrator for the values in fields on
this screen.
Also, you can specify the name of the FTP server instead of the IP
address. If you do this, ensure that you check
DNS and specify the IP
address of the DNS server in the box.
DNS server to resolve
name addresses (if
required)
Name of the remote FTP
server