MRMC MRMC-1464-01, Quick Start Manual

Page: 34 / 52

30
Robotic Pod Quick Start Guide Robotic Pod Quick Start Guide
Appendix 1 Troubleshooting
Typical symptoms, causes, and actions
Symptoms Cause and/or action
Pod head did not
appear connected in
MHC Check that all cables are connected, and all
devices have power.
Check you have added the correct IP address of
the Pod head in MHC.
If you have connected more than one Pod
heads, connected the MRMC system to
another local network, or moved the Pod head
between networks, check that correct addresses
have been entered in MHC.
The LEDs on the Pod
head did not light up.
A ‘!’ appears
with the Pod
head icon in
the MHC
Main screen. Click the spanner( ) icon appearing below
the Pod head icon to allow MHC to correct the
error.
Pod tracking is not
accurate Ensure that the PTA is installed perfectly
levelled to the ground. Ensure that you have
checked this with spirit level.
While tracking the
camera is pointing in
the wrong direction. The Pan axis must move to the left when
position is moved positively. If it is incorrect,
then scaling for the axis will need its sign
changing.
The Tilt axis must move up when position is
moved positively. If this is incorrect, then
scaling for the axis will need its sign changing.