MRMC MRMC-1464-01, Quick Start Manual

Page: 21 / 52

Note
The focus and zoom axes must be homed individually. If an error
occurs after homing, do the following:
Robotic Pod Quick Start Guide
17
Changing system configuration and network
settings
Launching MHC as Admin
To change any network setting, you need to be logged in to the MHC
Client as the Administrator.
1. Log out of the User login.
2. Log in to the MHC client as Administrator using the following
credentials:

Username: Admin

Password: Admin1234
1. In the > Robot > Axes tab, check that the Status of the axis
is ON in the grey box. If it is not, click the ENABLE button to
turn it on.
2. Click/tap the HOME button to home the selected axis.
Status should
be ON