MRMC MRMC-1464-01, Quick Start Manual

Page: 19 / 52

15
Robotic Pod Quick Start Guide Robotic Pod Quick Start Guide
Chapter 2 Setting up the Robotic Pod
System using MHC
To control and use the Pods, you need to connect them to the network
that has the PC running the MHC server software. You can choose to
assign the Pods to specific users using MHC server. Then, each user can
use the MHC client application to control the Pod assigned to them
1. Attach the cables to the Pod and PC, as described in the previous
section.
2. There is no power switch on the Pod; it is powered on whenever the
mains supply is attached and live.
3. Similarly, to turn off the Pod you simply remove the power cable.
Robotic Pod Quick Start Guide
4. Power up the PC. Both the MHC Server and Client applications are
started. The MHC Main page appears.
Observe that the connected Pod appears as white or green icons
light-grey tabs to show that it is connected over the network.
5. Clicking/tapping the Pod icon enables the Pod and changes the icon
to green showing it is selected for control from the Main page.
Observe that the disconnected Pods appear as red icons.