MRMC Bolt Junior, Quick Start Manual

Page: 28 / 40

Bolt Junior Quick Start Guide
24
Bolt Junior Quick Start Guide Bolt Junior Quick Start Guide
Appendix 2 Bolt Junior panels
Bolt Junior Base panel connector summary
1.
240V AC
output, for general use by additional devices that you want
to mount on the base.
2.
VIDEO 1 IN
input connector for the video 1 signal from the camera.
This has a straight-through internal connection to the
VIDEO 1
OUT
connector (8).
3.
VIDEO 2 IN
connector for the video 2 signal from the camera. This
has a straight-through connection to the
VIDEO 2 OUT
connector
(9).
4.
ETHERNET
(Not used)
5, 10.
ETHERNET
connectors for communications between multiple
Ethernet devices on the rig. These two connectors share a common
Ethernet hub within the Bolt Junior Base. You ordinarily attach one
of these to the computer stack (via the umbilical cable) and one to
connector J1202 on the base of the arm to service the Ulti-box
mounted on the arm.
6.
48V OUT
power connector. You usually use this to power the
Ulti-box (and its attachments) on the Bolt Junior arm, by attaching a
cable from this connector to the J1202 connector on the arm.
4 3 2 1 5 6
10 9 8 7 11 12