MRMC Bolt Junior, Quick Start Manual

Page: 16 / 40

Bolt Junior Quick Start Guide
12
Starting up the Bolt Junior system
Once you have attached all the cables, you power up the rig by switching
on the components in the order described below.
1. Make sure you have secured the area around Bolt
Junior. Put up guard rails around Bolt Junior (and the
track) as necessary, and tell others on the set that you
are now powering up the rig.
2. Release the E-stop on the Bolt Junior Base by turning
the red button clockwise until the button pops up. Also
make sure the key is in the clockwise position.
Do not
release the other E-stop by the computer stack yet.
3. Power up Bolt Junior itself as follows:
The Bolt Junior power-up sequence takes about three minutes.
Turn on the power switch on
the side of the Bolt Junior
Base.