16
manufacturer.
Maximum permissible temperature difference between reaction vessel and the jacket is not
more than 80
℃
(ΔT<= 80
℃
).
Please do not move the reactor when it is working.
Beware of scaling! Please wear glasses when dealing with the sample.
Do not move it when the temperature of the vessel >=80
℃
!
Do not refit this device.
Do not use it outdoor. Exposed in rain or got wet with splashed water on the surface may cause
personnel injury.
3.2
Operation
1) Check if the power supply is in conformity with the required power on the label.
2) Turn on the power switch, the temperature display window displays the current
temperature, the speed display window flashes to display the current speed, press the
rotary button, the display window stops flashing, use the speed control knob to
select the appropriate speed, the speed should be adjusted from slow to fast slowly.
3) The flow of materials and the power of the motor speed may cause resonance at a
certain point, please change the speed of the motor to avoid resonance.
4) If the sealing performance has deteriorated, please check the rotary sealing device in
the mixer sleeve.
5) After the reaction is completed, the temperature control unit should be turned off
when the temperature of the material in the vessel is close to room temperature.
Note:
After shutting down the temperature control unit, please do not close the valves in the
middle of the circulation hoses, keep all hoses clear. Otherwise, when the temperature
in the jacket or in the vessel changes dramatically, it may cause any crack or broken to
the reactor body.
6) Shut down the Vacuum Pump.
7) Adjust stirring speed to minimum value to stop stirring.
8) Power off.
