15
3
Operation
3.1
Caution
Table 3.1
Caution
Please read this manual carefully before using the reactor.
Please place the reactor steadily on the floor, then lock the swivel casters.
The best ambient temperature for this device is 5
—
35
℃
. It might cause any failure to the
machine if it works for a long time beyond this temperature range.
Avoid strong vibration, otherwise it may cause damage to the glass parts.
Please connect the power supply according to the requirements on the name plate.
Do not press the power cord. When there is a heavy object on the power line or the power line
goes through any objects, it may cause damage to the power cord and lead to electric shock or
fire.
Please disconnect the power supply and pull out the plug out of the socket when the machine
will not be used for a long time, to avoid dust accumulation on the power line, which might lead
to a fire caused by partial overheating of the power line.
Pull the plug from the socket:
Hold the plug and pull the plug backwards. Do not pull it hard.
Please disconnect the power supply and the plug when moving it. Do not move it when
connected to power, which might cause electric shock or lead to a fire.
Please clean the glass parts before installation or put the reactor into use.
When connect the glass parts, please apply some vacuum grease on the interface to ensure its
sealing effect.
When install glass parts, please apply moderate force to prevent the glass from breaking.
Glass is fragile, beware of impact.
Do not use the glass reactor with strong alkaline solutions.
Installation of glass vessel with a volume not less than 20L, it should be done under the
guidance of professionals.
When the reactor is used with temperature control equipment, the viscosity of the circulating
liquid should be
≤
50cp.
When the reactor is used with a temperature control equipment, the circulation pump should be
turned on first, and then the temperature control equipment should be turned on when the liquid
circulation pipeline is unobstructed.
Do not heat it by using vapors.
If there is any abnormal situation during operation, please disconnect the power supply
immediately, pull out the plug and ask professionals for technical support or contact the
