Ultrasonic milkanalyser
Operation manual
20/92
xx.xx is the measured milk sample’s conductivity in [mS/cm]. If the results are
outside the limits for this type of sample (see table from the Appendix
Conductivity measurement)
, the cursor flashes after the letter С, reminding
that the sample is not correct. On the printout it is printed as !!!.
If the conductivity value is outside measuring range (2-14 mS/cm), the
following message appears on the display:
C=OutRg (Out of Range)
, and on the printout there isn’t any line with
conductivity value.
3.2.3.2.
Write down the results in the form. The results remain on the display
till a new measurement is started. If the analyser is connected to a computer,
it automatically sends the data to the computer and/or prints them.
