When the reading mode is continuous measurement mode, the meter
always monitoring the whole measurement process, until user manually end
the measurement.
The meter allows users to store measurement results manually. During the
measurement process, press the "End" key to terminate at any time.
2.7.8
End measuring, result report
When the measuring is finished or terminated, the meter provides a simple
report, including the measurement parameters, the way of reading and
balance condition and the quantity of storage results, as shown in Figure 20.
At this time, choose to remeasure, or end the measurement etc.
Measurement Result Diagram (Figure 20)
2.8 Data center
The meter supports the view of conductive probe calibration information and stored
measuring result.
2.8.1 View conductive probe
calibration information
The meter supports the view of detailed conductive probe calibration information,
including the number of the last calibration, calibration results and detailed
records of each point, as shown in Figure 21.
These information is available in the initial state, measuring state and check the
calibration results, etc.
