MQ Multiquip MP115E Operation And Parts Manual Download Page 6

Page: 6 / 90

PAGE 6 — MP1 SERIES MASONRY SAW • OPERATION AND PARTS MANUAL — REV. #2 (10/12/17)

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others. The

safety messages specifi cally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL

result in

DEATH

SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD

result in

DEATH

SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD

result in

MINOR

MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Rotating parts hazards

Symbol

Safety Hazard

Cutting and crushing hazards

Electric shock hazards

Summary of Contents for MP115E



























































































Search results

Summary of Contents for MP115E

Reviews:

Related manuals for MP115E

Brands by name

Popular brands

MQ Multiquip MP115E, Operation And Parts Manual

Search results

Summary of Contents for MP115E

Reviews:

Related manuals for MP115E

Brands by name

Popular brands