MQ Multiquip MP115E, Operation And Parts Manual

Page: 12 / 90

PAGE 12 — MP1 SERIES MASONRY SAW • OPERATION AND PARTS MANUAL — REV. #2 (10/12/17)
GENERAL INFORMATION
MP1 MASONRY SAW
The MP1 masonry saw is designed for vigorous wet-cutting
masonry applications. The heavy-duty aluminum conveyor
cart and ball bearing roller wheels ensure material stability
and smooth travel. In addition a reinforced jig-welded
steel frame provides rigidity for cutting accuracy and long
service life.
This saw is available with either an
electric motor or
a gasoline engine . The heavy duty electric motors are
available in either 1.5 HP or 2.0 HP with overload protection.
Each motor can operate at either 115 VAC or 230 VAC.
The electric motor input voltage is selectable by means of
a toggle switch. Always make sure that the input voltage
being supplied to the motor matches the position of the
voltage selector toggle switch located on top of the motor.
If desired, the MP1 saw can be configured with a 4.8 HP
Honda GX160 gasoline engine.
All MP1 models include a high flow water pump, cutting
jig, water hoses and associated plumbing to enable the
operator to begin wet cutting.
WET CUTTING APPLICATIONS
For operator safety, ALL sawing must be conducted with
the water delivery system that is provided with the masonry
saw. Ensure that a free flow of clean water is properly routed
from the pump through the plumbing system so that the
blade receives an ample amount of water. This action is
required to safeguard against the operational hazards of
silica exposure.
WARNING
Adherence to the OSHA 2017 Ruling governing
Occupational Exposure to Respirable Crystalline
Silica, requires that all sawing operations MUST BE
conducted with an integrated water delivery system
that feeds water to the blade.
BLADE APPLICATIONS
This saw has been designed to incorporate the use
of diamond blades as the cutting tool. The optimum
performance of this saw is best evidenced by using 14-inch
(356 mm) diamond blades that match the material being
cut. Ask your dealer, or call
MULTIQUIP
about your specific
cutting application.
FEATURES
„ 1.5 or 2.0 HP, 115/230 VAC , 60 Hz heavy duty electric
motors with overload protection.
„
4.8 HP Honda GX160 gasoline engine.
„
14-inch blade capacity provides 5-inch depth of cut.
„
Rugged aluminum conveyor cart for optimum stability.
„
Open back design permits capability of cutting large
materials.
„ Ergonomically designed cutting head provides operator
relief in high tempo operations.
„ Mounted carrying handles for easy transportation.
„ Rubber-matted cutting table helps hold the material
being cut in place while resisting vibrations for smoother
cuts with less chipping.
„
Cutting table marked in inches and centimeters (ruler)
for precision cuts.
„ Stay-level blade guard for operator safety.
„ Rigid steel frame minimizes vibrations and assures
accurate cutting.
„
Mechanical Water Pump Kit (Gasoline Model Only)
„
Electric Submersible Water Pump Kit (Electric Models
Only).