manualshive.com logo in svg

MQ Multiquip 24421, Operation And Parts Manual

The MQ Multiquip 24421 is a high-quality construction equipment designed for durability and efficiency. To ensure smooth operation and maintenance, it comes with an extensive Operation And Parts Manual. Download this essential manual for free from our website, enabling you to easily access all the necessary instructions and guidelines.

Share
Download
background image

PAGE 5 — JS36/30H55DE SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #0 (5/02/16) 

TRAINING CHECKLIST

Training Checklist

No.

Description

OK?

Date

1

Read operation manual 

completely.

2

Machine layout, location of 

components, checking of engine 

oil level.

3

Fuel system, refueling procedure.

4

Operation of controls (machine 

not running).

5

Safety controls, safety stop switch 

operation.

6

Emergency stop procedures.

7

Startup of machine, engine choke.

8

Maintaining a hover.

9

Maneuvering.

10

Pitching.

11

Concrete fi nishing techniques.

12

Shutdown of machine.

13

Lifting of machine (lifting bale).

14

Machine transport and storage.

Summary of Contents for 24421







































































Reviews:

No comments

Related manuals for 24421

Allen Engineering Corporation 049600 Operations & Parts Manual preview
049600
Brand: Allen Engineering Corporation Pages: 102

Brands by name

Popular brands

Load more brands