PAGE 25 — JS36/30H55DE SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #0 (5/02/16)
To Begin Troweling
1.
To begin troweling, push the throttle lever (Figure 27) forward
to the "
RUN
" position.
Figure 27. Throttle Lever (Run)
Concrete Finishing Techniques
The following steps are intended as a basic guide to machine
operation, and are not to be considered a complete guide to
concrete finishing. We suggest that all operators (experienced
and novice) read “
Slabs on Grade
” published by the
American
Concrete Institute, Detroit, Michigan
. Read the
“Training” section of this manual for more information.
CENTRIFUGAL
SAFETY “STOP”
SWITCH
THROTTLE
LEVER
RUN
OPERATION
Pitching the Blades (Standard Handle)
To pitch the blades upwards using the "
Standard
" handle,
(Figure 28) simply turn the
star-wheel
clockwise. Turning the
star wheel counter clockwise will cause the blades to lay flat.
Figure 28. Blade Pitch Star Wheel
BLADE PITCH
STAR WHEEL
INCREASE
BLADE PITCH
(CW)
DECREASE
BLADE PITCH
(CCW)
Summary of Contents for 24421
Page 47: ...PAGE47 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 49: ...PAGE49 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 68: ...PAGE68 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 69: ...PAGE69 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 ...
