PAGE 15 — JS36/30H55DE SERIES WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #0 (5/02/16)
TROWEL COMPONENTS
2
3
12
1
4
5
6
7
8
9
10
11
16
14
15
17
18
19
13
Figure 2. Trowel Control and Components
Figure 2 shows the location of the basic controls or
components, for the trowel. Listed below is a brief
explanation of each control or component.
1.
Lift Bracket
— Safety hand holds to be grasped when
lifting the trowel with two persons.
2.
Engine
— Honda 4.8 HP gasoline engine.
3.
Lifting Bale
— Attach a suitable lifting device to lifting
bale whenever lifting of the trowel is required.
4.
Handlebar Adjuster
— Change the angle/height of the
handle bars by loosening star wheel, adjust handlebars
to desired location, tighten starwheel firmly to hold
handlebars in that position.
5.
Pitch Control Star Wheel
— To adjust the pitch of the
blades, rotate the star wheel clockwise to pitch blades
upwards. Rotate star wheel counterclockwise to pitch
blades flat (no pitch).
6.
Throttle Lever
— Controls engine speed. Returns
engine to idle when released.
7.
Operator Presence Lever (Optional)
— This lever
must be engaged (squeezed), when starting the
engine. Releasing the lever will stop the engine.
8.
Hand Grips
— When maneuvering of the trowel is
required
ALWAYS
place both hands on each grip to
operate the trowel. Replace hand grips when they
become worn or damaged.
9.
Handle Bar Pad
— Foam rubber pad that protects the
body when coming in contact with handle bar.
10.
Vibratory Handle Bar
— Installed rubber shock
mounts/isolators reduces vibration when the trowel
is operating.
11.
Centrifugal Stop Switch
— In the event the operator
loses control of the trowel, this switch will shut down
the engine.
12.
36" Guard Ring Segments (6)
— Six segements
fastened together to support 36" bumper and bumper
ring. Also covers trowel blade edges.
13.
Trowel Arm
—
NEVER
operate the trowel with a bent,
broken or out of adjustment trowel arm. If the blades
show uneven wear patterns or some blades wear out
faster than others, the trowel arm may need to be
adjusted. Use the trowel arm adjustment tool P/N 1817
to adjust the trowel arms.
Summary of Contents for 24421
Page 47: ...PAGE47 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 49: ...PAGE49 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 68: ...PAGE68 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 NOTES ...
Page 69: ...PAGE69 JS36 30H55DESERIESWALK BEHINDTROWEL OPERATIONANDPARTSMANUAL REV 0 5 02 16 ...
