UNI MP100 User’s Guide
12
5.
Computer Interface
Computer interface requires a Single Docking Box or CaliCase Docking Station connected to a
PC fitted with mPower Suite software. mPower Suite can be used to 1) download logged alarm
and calibration events, 2) upload configuration parameters to the instrument and 3) upgrade the
instrument firmware. mPower Suite and instrument firmware can be downloaded from the
website at https://www.mpowerinc.com/software-downloads/ .
1.
Connect the USB cable to both the Docking Box and the PC.
WARNING!
Connect only in non-hazardous environments!
2.
Turn on the instrument and insert it face down into the Docking Box.
3.
Start mPower Suite on the PC and click the “Search” button on the bottom panel.
4.
Find the instrument in the left bar Device Connected list. Click on the S/N to get the
configuration file from the instrument.
5.
Edit the configuration parameters as desired and click “Write” to upload the configuration to
the instrument.
6.
“Read” downloads the current configuration file from the instrument.
7.
“Save” stores the current configuration file to the PC.
8.
“Load” calls up a stored configuration file from the PC to mPower Suite.
9.
To update the instrument firmware, select “Firmware Upgrade”. The firmware must first
be downloaded to the PC from the mPower website www.mPowerinc.com.
mPower Suite Screen
