MPM MWA-04, User Manual

Page: 15 / 40

Indication on the display Meaning
Woman
P0-P9 Data memory
cm (ft:in) Height
% Percentage values of fat, water, muscles mass
kg (lb/st:lb) Body mass
fat Fat content
TBW Water content
BMI Body mass index
KCAL The minimum daily calorie intake index (BMR).
Underfat/ Healthy/ Overfat/ Obese Underfat/ Healthy/ Overfat/ Obese
USING THE APPLIANCE - WEIGHING
1.
Place the scale on a hard, stable and flat surface (not on a carpet, nor other soft surfaces).
2.
If batteries are properly installed, the scale is ready to use. Stand on it and measure the
weight.
3.
When standing on the scale the body weight should be evenly distributed. Stand still for a
moment. When the weight is measured correctly, the result appears on the display twice.
4.
After getting off the scale, when weighing is completed, the scale will switch off automati-
cally after approx. 8 seconds.
5.
Scale shows mass above 5 kg.
STORING PERSONAL DATA IN THE SCALE MEMORY
The scale may store the data of up to 10 users.
At the stage of programming you should enter the data within a few seconds. Otherwise the
appliance automatically
cancels data entry.
To enter personal data, follow the instructions below.
1.
Switch on the scale by pressing the key (7). The memory location number (P0) starts to
flash. Confirm the selection by pressing the key (6) or select other memory location (P1-P9)
by pressing the key (6)
or (8) . Then press the key (7) to move to the next step of pro-
gramming.
2.
The sex indication starts to flash, use the key (6) or (8) to select. Then press the key (7)
to confirm the selection and move to the next step of programming.
3.
The height indication starts to flash, use the key (6) or (8) to select. Press the key (7)
to confirm the selection.
4.
The age indication starts to flash, use the key (6) or (8) to enter your age. Then press
the key (7) to confirm the selection.
5.
The symbol “----” will be displayed for a short time meaning that the data entry mode is on.
Next you will see the memory location, sex and weight symbol „0.0 kg”(0.0 lb / 0: 0 st:lb), now
you may perform the measurement (see BODY COMPOSITION ANALYSIS pt. 3).
If weighing is not performed, the scale will switch off automatically after approx. 6 seconds.
15
GB