4. Using a scotch-lock t-tap and male quick-slide terminal, connect the red wire of the VSS cable to the vehicle
OSS wire.
5. Connect the black wire of the VSS cable to a vehicle chassis ground.
6. Secure all cables and proceed to accuracy test.
Ford Explorer 2007-2008
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Route the blunt cut end of the universal VSS cable through the firewall into the engine compartment.
3. Locate the violet wire with orange tracer (VS OUT) at pin 1 of connector C175B (middle connector) on the
Powertrain Control Module (PCM) at the passenger-side firewall.
4. Using a scotch-lock t-tap and male quick-slide terminal, connect the red wire of the VSS cable to the
violet/orange wire.
5. Connect the black wire of the VSS cable to a vehicle chassis ground.
6. Secure all cables and proceed to accuracy test.
Ford F-150 and Ford Expedition 2004 – 2006
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Route the blunt cut end of the universal VSS cable through the firewall into the passenger’s side engine
35
