7
Plug the power cord (2) into the AC IN connection on the display and plug
the other end of the power cord into a three-pin AC power outlet or a UL-
approved power strip. (See Figure 2.)
Figure 2: Connecting Cables
Note: A certified power supply cord must be used with this equipment. The
relevant national installation and/or equipment regulations need to be
considered. Use a cord that meets the following criteria:
•
Monitor side must have IEC320-type female, straight plug
•
Main side must have IEC320-type male, straight plug
•
Wire type must be UL/CSA certified, 18 AWG X 3C
